The fireplace can have a pressure regulator in it, but we are currently in a scope beyond your initial question. You will often discover the fireplace controls on the ground of the fireplace. Or, at times, the fireplace wouldn’t light in any way. It’s important that you know how to light a gas fireplace. Even if you opt to get a service technician repair your gas fireplace, you are going to save yourself money if you are able to direct him straight to the issue. The next step and the way to light a gas fireplace is to get the ignition button.
To start, you’ll need to access the pilot tube and the thermocouple to be able to observe them and find out what problems are found. In the event the pilot tube is dirty, enable the furnace cool down and switch off the gas. In addition, a dirty pilot tube won’t be as reliable than a clean one.
Start by turning your pilot light off, if it isn’t already. If you still are not able to get the pilot light to ignite, speak to your gas company. When starting the system for the very first time, you must light the pilot. If you can’t get the pilot light to turn on, something is most likely erroneous. The pilot is situated on the left side of the heater, behind the center log and on the rear of the rear burner. It’s possible to tell whether you have an electronic pilot as it makes a clicking sound for a couple seconds before it lights.
Check the major gas valve to be sure the gas is turned on. If it is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. If you don’t smell gas, visit the next step.
You will have the ability to decide on whether the little flame is out. Likewise be certain that the pilot flame is really reaching the thermocouple. Turning off the pilot flame in the summer is simple to do and well worth the effort, but not many people do this, either since they don’t understand how or aren’t aware they should.
In the event the light goes out, you require the assistance of a professional service technician. To begin with, check to see whether your pilot light is lit. In the event the pilot light does not light on the very first try, you might have to hold down the knob long enough to purge the air from the gas line permitting the gas to get to the pilot assembly. If that’s the case, it is not going to face the pilot light. Naturally, an unreliable pilot light is something you should worry about and fix the moment you notice it.
Regardless of what the reason behind your pilot light being out is, you may want to turn it back on as soon as you receive an opportunity to. The way a pilot light is created is also straightforward. It is a small flame inside the device that is lit at all times. It is generally located behind a panel that you can remove or at the bottom of your fireplace. You may even have to switch off your own pilot light to wash your fireplace.